51 • Control Keypad
_______________________________________________________________________________________________
7.7 Mode Pages
Upon initiation of the HRVS-DN, the LCD displays motor’s operating current:
I1 I2 I3
0 0 0 %
You can review all mode pages by pressing the Mode key:
MAIN & PROTECT.
- **** -
START PARAMETERS
- **** -
STOP PARAMETERS
- **** -
DUAL ADJUSTMENT
PARAMETERS
These pages are skipped if HRVS-DN is programmed to
MINIMIZED MODE and are shown only in MAXIMIZED MODE.
Refer to section
6.4.1 on page 40 for changing mode from
MINIMIZED MODE to MAXIMIZED MODE.
FAULT PARAMETERS
- **** -
I/O PROGRAMMING
PARAMETERS
COMM. PARAMETERS
- **** -
STATISTICAL DATA
- **** -
To Next Page
Loading...
