22 • Technical Data
_____________________________________________________________________________________________
MV Soft Starter Specification
No. ITEM Options Specify
11. PROFIBUS Communication NO / YES
12. DeviceNet Communication NO / YES
13. Insulation Test Module NO / YES
14. Enclosure Class IP31,IP32,IP54,IP65 Keypad - Behind glass Window
15. Motor Insulation Protection
(MIP) YES/NO
16.
Short Circuit Capacity
17. Paint 80µM RAL 7032 Other
18. Incoming Cabinet NO / YES
19. Input Cables Top / Bottom
20. Output Cables Top / Bottom
21. Door Opening Open to the Left / Right
22. Door Locks & Stoppers YES/NO
23. Mains On Load Switch
24. Main Fuse + Fuse Holder
25. Blown fuse indicator (striker-
pin)
26. Line Contactor NO / YES
27. Bypass Contactor NO / YES
28. Capacitor Bank Contactor NO / YES
29. Provision for Bank
Connections NO / YES
30. Motor Protection Relay MPS-6, MPS 3000-P/C
31. Lamp Test System NO / YES
32. Digital Panel Meter NO / DPM-10
33. Space heater NO / YES
34. Cooling Fan NO / YES
35. Special Thick Painting NO / YES
36. Packing Sea fright, Air fright, No
37. Labeling
37.1. Solcon cabinet logo NO / YES
38. Instruction Manuals Standard – 2 sets at door pocket
39. Approvals
39.1. Marine Design Review NO / YES
39.2. Requested Date
40. Drawings for Approval
41. Delivery - Chassis
42. Delivery – Final
43. Special Notes
44.
Spare
Parts
1. 7.
2. 8.
3. 9.
4. 10.
5. 11.
6. 12.
45. Packing Instructions
46. Marking
Issued by: Date :
Approved by (Sales Manager) : Date :
To Next Page
Loading...
Need help?
General
