Welcome
Congratulations on your purchase of the new DC5!
The DC5 is the ultimate label and decal production unit, combining high image durability
and precision contour cutting into one device.
The DC5 uses thermal transfer technology. This is a dry transfer printing process that uses
heat and pressure to create a durable bond with the resin-based inks and the media. The
resin inks are supplied on ribbons containing densely packed pigments suspended in a
solid plastic carrier. This high pigment density results in images that are highly abrasion
resistant, and it provides a long term UV and water resistance with a long outdoor durability
without laminations.
Thermal transfer printing produces no fumes at all, creates no mess and does not require
maintenance or use of cleaning chemicals.
Every aspect of the DC5 has been designed for simplified operation. Media loading is a
child’s play, thanks to auto media alignment. Ribbons are a snap to refill and can’t be loaded
improperly.
This manual is a reference guide for installing and operating the DC5 series cutters.
Minimum revisions needed for this manual:
Firmware DC5 main : 006
Firmware DC5 com : 006
USB driver : 6.4
Summa Printer Tools: 1.4.0.0
Color Control : 8.0 (March 2014 – setup 04/01/2014)
To Next Page
Loading...
