Summa S3 Series - Page 90

S Class 3 User’s Manual
Detailed operation 4-4
You can make use of this submenu when loading sheet material. The maximum loading length
can be set.
This action is explained in section 1.5.4.
This functionality cuts off the currently loaded material.
Use this function to cut off a defined number of sheets from a roll with a fixed length.
This submenu allows you to recut the last file sent to the cutter (provided it fits in the buffer).
This submenu allows automating jobs on sheets. See section 3.3.2.
4.3.3 Load media
4.3.4 Load wider
4.3.5 Cut off
4.3.6 Cut off sheets
4.3.7 Recut
4.3.8 Sheet mode