Suzuki DF70A - Page 23

General Information: 0A-14
General Bolt
NOTE
These value are only applicable when torque for a general bolt is not listed in the “Important
Fasteners” table.
Special Tools and Equipment
Recommended Service Material
Z9J0110108001
Type of Bolt
Thread
Diameter
Tightening Torque
N⋅mkgf-mlbf-ft
(Conventional or “4” marked bolt)
5 mm 2 – 4 0.2 – 0.4 1.5 – 3.0
6 mm 4 – 7 0.4 – 0.7 3.5 – 5.0
8 mm 10 – 16 1.0 – 1.6 7.0 – 11.5
10 mm 22 – 35 2.2 – 3.5 16.0 – 25.5
(Stainless steel bolt)
5 mm 2 – 4 0.2 – 0.4 1.5 – 3.0
6 mm 6 – 10 0.6 – 1.0 4.5 – 7.0
8 mm 15 – 20 1.5 – 2.0 11.0 – 14.5
10 mm 34 – 41 3.4 – 4.1 24.5 – 29.5
(“7” marked bolt)
5 mm 3 – 6 0.3 – 0.6 2.0 – 4.5
6 mm 8 – 12 0.8 – 1.2 6.0 – 8.5
8 mm 18 – 28 1.8 – 2.8 13.0 – 20.0
10 mm 40 – 60 4.0 – 6.0 29.0 – 43.5
I9J011010014-01
I9J011010015-01
I9J011010016-01
99000–22540
SUZUKI Outboard
Motor Gear Oil
99000–25161
SUZUKI Water
Resistant Grease (250
g)
99000–31120
SUZUKI Silicone Seal
(50 g)
99000–31140
SUZUKI Bond 1207B
(100 g)
99000–32020
SUZUKI Thread Lock
1333B (50 g)
99000–32050
SUZUKI Thread Lock
1342 (50 g)
99000–25140
SUZUKI Moly Paste
(50g)
http://SelfFixer.com