4B-1 Fuel / Water Hose Routing:
Wire / Hose Routing
Fuel / Water Hose Routing
Precautions
Precautions for Fuel / Water Hose Routing
Z9J0114200001
CAUTION
• Do not over-bend (kink) or twist hoses when installing.
• When installing hose clips, position tabs to avoid contact with other parts.
• Check that hoses do not contact rods and levers during either engine operation or standstill.
• Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
• Care should be taken not to cause hoses to be compressed excessively by any clamp when fitted.
Schematic and Routing Diagram
Fuel Hose Routing
Z9J0114202001
1
2
3
5
6
7
9
10
4
11
12
8
I9J011420001-02
1. Fuel hose (Filter to fuel pump) 5. Evaporation hose / protector 9. Fuel vapor separator
2. Fuel hose / protector (Pump to fuel vapor separator) 6. Fuel hose (Fuel cooler to fuel vapor separator) 10. High pressure fuel filter
3. Breather hose / protector 7. Clamp 11. Low pressure fuel pump
4. Fuel hose (High pressure fuel filter to 3-way joint) 8. Clamp
: Clamp the fuel hose (2) and (3).
12. Low pressure fuel filter
To Next Page
Loading...
