2A-8 Housing and Bracket:
15) Remove STBD / PORT upper mount nuts (24) and
washers.
16) Remove engine holder with oil pan.
17) Remove five bolts and the mount case cover (25).
18) Remove three bolts and upper mount cover (26).
19) Remove the upper mounts (27), upper thrust mount
(28), damper (29) and mount bolts (30).
20) Remove the six bolts and the engine holder (31)
from the oil pan.
24
I9J011210027-01
I9J011210028-01
25
I9J011210029-01
26
I9J011210030-01
28
27
27
I9J011210031-01
30
30
29
I9J011210032-02
31
I9J011210033-02
31
I9J011210034-02