Suzuki GSF1250 - Page 214

1D-12 Engine Mechanical:
9) Remove the STP sensor (13).
NOTE
Prior to disassembly, mark sensor’s original
position with a paint or scribe for accurate
reinstallation.
Special tool
: 09930–11950 (Torx wrench)
CAUTION
!
Never remove the IAP/TP/IAT sensor (14)
from the throttle body.
CAUTION
!
Never separate the throttle bodies, left and
right.
CAUTION
!
Never remove the throttle valve (15) and
secondary throttle valve (16).
CAUTION
!
These adjusting screws (17), (18) are factory-
adjusted at the time of delivery and therefore
avoid removing or turning them unless
necessary.
13
I718H1140327-02
14
I718H1140331-02
I718H1140332-01
15
16
I718H1140333-03
17
18
I718H1140334-02