Suzuki GSF1250 - Page 216

1D-14 Engine Mechanical:
• Apply a thin coat of engine oil to the new cushion seal
(2) and the O-ring (3).
CAUTION
!
Replace the cushion seal and O-ring with the
new ones.
• Apply a thin coat of engine oil to the new O-rings (4).
CAUTION
!
Replace the O-rings with the new ones.
• Assemble the fuel delivery pipes as shown.
• Install the fuel injector (5) by pushing it straight to the
delivery pipe (6).
CAUTION
!
Never turn the injector while pushing it.
NOTE
Align the coupler “D” of injector with boss
“E” of the delivery pipe.
• Connect the fuel injector couplers to the fuel injectors.
NOTE
Make sure that each coupler is installed in
the correct position.
• Install the fuel delivery pipe assembly (7) to the
throttle body assembly.
CAUTION
!
Never turn the fuel injectors while installing
them.
2
3
I718H1140340-02
4
I718H1140341-02
I718H1140342-01
Coupler Wire color
#1 Y/R and Gr/W
#2 Y/R and Gr/B
#3 Y/R and Gr/Y
#4 Y/R and Gr/R
6
“D”
“E”
5
I718H1140404-01
#1
#2
#3
#4
I718H1140344-01