1D-18 Engine Mechanical:
4) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation in Section 1G (Page 1G-9)”.
5) Drain engine coolant. Refer to “Cooling System
Inspection in Section 0B (Page 0B-12)”.
6) Disconnect the battery (–) lead wire.
7) Disconnect the fuel feed hose (1).
8) Remove the thermostat connector (2) and its
bracket. Refer to “Thermostat Connector /
Thermostat Removal and Installation in Section 1F
(Page 1F-9)”.
9) Remove the PAIR control solenoid valve (3) and
hoses.
10) Disconnect all ignition coil/plug cap couplers and
then remove the ignition coil/plug caps (4).
11) Remove the throttle body assembly (5). Refer to
“Throttle Body Removal and Installation (Page 1D-
9)”.
12) Remove the radiator (6). Refer to “Radiator / Cooling
Fan Motor Removal and Installation in Section 1F
(Page 1F-5)”.
13) Remove the muffler and exhaust pipes (7) along with
the HO2 sensor. Refer to “Exhaust Pipe / Muffler
Removal and Installation in Section 1K (Page 1K-3)”.
14) Remove the air cleaner box (8). Refer to “Air Cleaner
Box Removal and Installation (Page 1D-6)”.
I718H1140388-01
1
2
I718H1140356-01
3
4
4
I718H1140357-01
5
I718H1140358-01
6
7
I718H1140359-01
8
I718H1140360-01
To Next Page
Loading...
