Suzuki GSF1250 - Page 235

Engine Mechanical: 1D-33
• Install the oil pipe and tighten the mounting bolts to
specified torque.
NOTE
Fit the washer (1) to each oil pipe mounting
bolt.
Tightening torque
Oil pipe mounting bolt (a): 10 N·m (1.0 kgf-m, 7.0
lb-ft)
Cam Chain Tension Adjuster
• Retract the push rod by pushing the stopper (1).
• Install a new gasket (2).
CAUTION
!
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster (3) and tighten
its mounting bolts.
Tightening torque
Cam chain tension adjuster mounting bolt (a): 10
N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the spring (4).
• Install the gasket (5) and cam chain tension adjuster
cap bolt (6).
NOTE
Click sound is heard when the cam chain
tension adjuster cap bolt is installed.
• Tighten the cam chain tension adjuster cap bolt (6) to
the specified torque.
Tightening torque
Cam chain tension adjuster cap bolt (b): 23 N·m (
2.3 kgf-m, 16.5 lb-ft)
CAUTION
!
After installing the cam chain tension
adjuster, check to be sure that the adjuster
works properly by checking the slack of cam
chain.
(a)
1
I718H1140069-01
1
I718H1140070-03
(a)
(a)
2
3
I718H1140071-03
5 4
(b)
6
I718H1140072-03