1D-34 Engine Mechanical:
• After installing the cam chain tension adjuster, rotate
the crankshaft (some turns), and recheck the
positions of the camshafts.
• Be sure to check and adjust the valve clearance.
Refer to “Valve Clearance Inspection and Adjustment
in Section 0B (Page 0B-5)”.
Throttle Body
• Install the throttle body (1). Refer to “Throttle Body
Removal and Installation (Page 1D-9)”.
Right Crankshaft Cover
• Apply SUZUKI BOND lightly to the mating surfaces at
the parting line between the upper and lower
crankcases as shown.
: Sealant 99000–31140 (SUZUKI Bond
1207B or equivalent)
• Install the gasket and right crankcase cover (1).
CAUTION
!
Use a new gasket to prevent oil leakage.
Spark Plug
• Install the spark plugs. Refer to “Ignition Coil / Plug
Cap and Spark Plug Removal and Installation in
Section 1H (Page 1H-4)”.
Cylinder Head Cover
• Install a new gasket to the cylinder head cover.
CAUTION
!
Use the new gasket to prevent oil leakage.
I718H1140396-01
1
I718H1140074-02
I718H1140075-03
1
I718H1140077-01
To Next Page
Loading...
