ABS: 4E-28
8) Follow the displayed instructions. 9) Check that both “Current DTC” (4) and “Past DTC”
(5) are deleted (NIL).
10) Close the SDS tool and turn the ignition switch OFF.
11) Disconnect the SDS tool and install the left frame
cover.
12) Ride the motorcycle at more than 30 km/h (18.6
mile/h) and quickly apply the brakes to check that
the ABS activates correctly.
I705H1110006-01
I705H1110009-01
5
4
I718H1450057-01
I718H1450053-01
To Next Page
Loading...
