Telit Wireless Solutions ME310G1 - Page 1028

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1028 of 1039 2021-09-23
Not Subject to NDA
AT#TRACE=?
Test command returns OK.
Here are some examples:
•
Set all trace outputs OFF
AT#TRACE=0
OK
•
Set all trace outputs ON
AT#TRACE=1
OK
•
Enable/disable trace outputs selected
AT#TRACE=,"generic=1,clock=0,lwm2m=1,pdp=0,gnss=0,ati=0"
OK