Telit Wireless Solutions ME310G1 - Page 211

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 211 of 1039 2021-09-23
Not Subject to NDA
31
:
-51 dBm or greater
99
:
not known or not detectable
<ber>
integer
N/A
measurements of the channel bit
error rate, expressed in %, are
mapped to <ber> as shown below
Values:
0
:
less than 0.2%
1
:
0.2% to 0.4%
2
:
0.4% to 0.8%
3
:
0.8% to 1.6%
4
:
1.6% to 3.2%
5
:
3.2% to 6.4%
6
:
6.4% to 12.8%
7
:
more than 12.8%
99
:
not known or not detectable
4G Networks
The execution command returns the following message:
+CSQ: <rssi>,<rsrq>
Name
Type
Default
Description
<rssi>
integer
N/A
Received Signal Strength Indication.
For <rssi> to be compliant with 3GPP
TS27.007 specification, levels are
mapped to range 0...31.