ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 22 of 1039 2021-09-23
Read:This section provides all information related to READ
functionality of the AT command involved. If there is strictly and
relevant READ information, it can be found at the end of the section.
Test: This section provides all information related to TEST
functionality of the AT command involved. If there is strictly and
relevant TEST information, these can be found at the end of the
section.
Additional info: This section provides any kind of additional and useful
information related to the AT command section as well as command
exceptions or special behavior cases
Reference: This section provides useful references (standards or
normative) related to the AT command involved.
Example: This section provides useful examples related to the AT
command involved.
Table 1: Symbol Conventions
All dates are in ISO 8601 format, that is. YYYY-MM-DD.
To Next Page
Loading...
