Telit Wireless Solutions ME310G1 - Page 244

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 244 of 1039 2021-09-23
Not Subject to NDA
<codec_setn>
string
<format>=1, <codec_setn> are displayed in
textual format
Values:
FR
:
full rate mode enabled
EFR
:
enhanced full rate mode enabled
HR
:
half rate mode enabled
FAMR
:
AMR full rate mode enabled
HAMR
:
AMR half rate mode enabled
FAWB
:
full rate AMR wide band
UAMR2
:
UMTS AMR version 2
UAWB
:
UMTS AMR wide band
The command refers to codec information in speech call, and to
channel mode in data call.
If AT#CODEC=0, the reported channels codecs set, for <format>=0,
is 255 (all codecs).
AT#CODECINFO?
Read command reports <format> and <mode> parameter values in the
format:
#CODECINFO: <format>,<mode>
AT#CODECINFO=?
Test command returns the range of supported <format> and <mode>
parameters values.