Telit Wireless Solutions ME310G1 - Page 291

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 291 of 1039 2021-09-23
Not Subject to NDA
3GPP TS 24.008 Table
10.5.5.32/3GPP TS 24.008
AT#CEDRXS?
Read command returns the current settings for each defined value of <AcTtype> in
the format:
#CEDRXS:<AcTtype>,<eDRX_act_state>,<Req_eDRX>,<ReqPagTimeWindow>,<mod
e>[<CR><LF>
#CEDRXS:<AcTtype>,<eDRX_act_state>,<Req_eDRX>,<ReqPagTimeWindow>,<mod
e>[...]]]
If <AcTtype> is the same the device is registered to, the format is
#CEDRXS:<AcTtype>,<eDRX_act_state>,<Req_eDRX>,<ReqPagTimeWindow>,<eDR
X_nw_state>,<NW_prov_eDRX>,<NW_prov_PagTimeWindow>,<mode>
Additional info:
Meaning of the <eDRX_act_state> parameter.
Name
Type
Default
Description
<eDRX_act_state>
integer
0
eDRX status
Values:
0
:
eDRX disabled
1
:
eDRX enabled
Meaning of the <eDRX_nw_state> parameter.
Name
Type
Default
Description