Telit Wireless Solutions ME310G1 - Page 304

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 304 of 1039 2021-09-23
Not Subject to NDA
as the sum of
Band number (0
meaning "no low
band selected");
see #BND
command
<lte_nb1_band_pref.bits_65_128>
integer
-
indicates the
higher (65-128)
NB-IoT supported
bands, expressed
as the sum of
Band number (0
meaning "no high
band selected");
see #BND
command
The command needs a reboot to be effective.
AT#IOTBND?
Read command returns the current parameters setting for #IOTBND command in
the format:
#IOTBND:
<lte_m1_band_pref.bits_1_64>,<lte_m1_band_pref.bits_65_128>,<lte_nb1_band_p
ref.bits_1_64>,<lte_nb1_band_pref.bits_65_128>
AT#IOTBND=?
Test command reports the supported range of values for parameters:
<lte_m1_band_pref.bits_1_64>,<lte_m1_band_pref.bits_65_128>,
<lte_nb1_band_pref.bits_1_64>,<lte_nb1_band_pref.bits_65_128>