ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 326 of 1039 2021-09-23
Reports current SIM status
Values:
<status> parameter is meaningless for local SIM in absence of the
SIMIN pin, see #SIMDET command.
Entering AT#SIMPR= returns OK but has no effect.
AT#SIMPR?
Read command reports whether the unsolicited indication #SIMPR: is
currently enabled or not, along with the local and remote SIM status, in
the format:
#SIMPR: <mode>,<SIM>,<status><CR><LF>
#SIMPR: <mode>,<SIM>,<status>
If SAP functionality is not supported or enabled the remote SIM
status will always be 0
AT#SIMPR=?
Test command reports the range for the parameter <mode>
To Next Page
Loading...
