ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 373 of 1039 2021-09-23
text provided by the
SIM/USIM device in ASCII
format
The proactive commands are only those command types that use
the AT interface. SAT/USAT commands which are not using the AT
interface (not MMI related SAT commands, e.g. PROVIDE LOCAL
INFORMATION) are executed without sending any indication to the
user.
AT#STGI?
The read command returns the ongoing proactive command and the
SAT/USAT state. The message format is:
#STGI: <state>,<cmdType>
Additional info:
state of the sending of the SET UP
MENU proactive command (37),
refer to AT#STIA? command
ongoing proactive command code
AT#STGI=?
Test command returns the supported values of parameters <state> and
<cmdType>.
To Next Page
Loading...
