Telit Wireless Solutions ME310G1 - Page 377

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 377 of 1039 2021-09-23
Not Subject to NDA
<userAction>=0 is used, for example, to
48. accept a call when the ongoing proactive command is SET
UP CALL, <cmdType>=16
49. start a connection when the ongoing proactive command is
OPEN CHANNEL, <cmdType>=64
Use of icons is not supported. All icon related actions will respond
with no icon available.
AT#STSR?
The read command returns the ongoing proactive command and the
SAT/USAT interface state. The format message is:
#STSR: <state>,<cmdType>
If there is no ongoing proactive command, an ERROR message is returned.
Additional info:
Returned parameters.
Name
Type
Default
Description
<state>
integer
-
state of the sending of the SET UP
MENU proactive command (37),
refer to AT#STIA? command
<cmdType>
integer
-
proactive command code, refer to
#STGI command to have
information on the <cmdType>