Telit Wireless Solutions ME310G1 - Page 413

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 413 of 1039 2021-09-23
Not Subject to NDA
Name
Type
Default
Description
<stat>
integer
N/A
status value
Values:
0
:
new message
1
:
read message
2
:
stored message not sent yet
3
:
stored message already sent
4
:
all messages
In case of PDU mode the representation format (see +CMGF) is:
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>[<CR><LF>
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>[...]]
Name
Type
Default
Description
<index>
integer
-
message position in the storage list.
<stat>
integer
-
message status. See the above <stat>
parameter description.
<alpha>
string
-
String type alphanumeric representation
of <da> or <oa>, corresponding to an
entry found in the phonebook; used
character set is the one selected with
command +CSCS.
<length>
integer
-
PDU length in bytes
<pdu>
string
-
message in PDU format, according to
3GPP TS 23.040
When message format is TEXT mode, the <stat> parameter is: