Telit Wireless Solutions ME310G1 - Page 422

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 422 of 1039 2021-09-23
Not Subject to NDA
129
:
number in national format
145
:
number in international format (contains the "+")
<length>
integer
-
text length
<data>
string
-
TP-User-Data
If <dcs> indicates that 3GPP TS 23.038
default alphabet is used, each character
of GSM alphabet will be converted into
current TE character set (see +CSCS)
If <dcs> indicates that 8-bit data coding
scheme is used, each 8-bit octet will be
converted into two IRA character long
hexadecimal number (e.g. octet 0x2A will
be converted as two characters 0x32 0x41)
In both cases (in PDU or Text mode) if status of the message is
'received unread', status in the storage changes to 'received read'.
AT+CMGR=?
Test command returns the OK result code