Telit Wireless Solutions ME310G1 - Page 426

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 426 of 1039 2021-09-23
Not Subject to NDA
Indication is set, the entered text should consist of two IRA
character long hexadecimal numbers which ME/TA
converts into 8-bit octet (e.g. the 'asterisk' will be entered
as 2A (IRA50 and IRA65) and this will be converted to an
octet with integer value 0x2A)
To send the message issue Ctrl-Z char (0x1A hex). To exit without
sending the message issue ESC char (0x1B hex).
Name
Type
Default
Description
<da>
string
-
destination address, string type
represented in the currently selected
character set (see +CSCS).
<toda>
string
129
type of destination address
Values:
129
:
number in national format
145
:
number in international format (contains the
"+")
Unsolicited fields:
Name
Type
Description
<mr>
integer
TP-Message-Reference number as per 3GPP TS
23.040
<scts>
string
TP-Service Centre Time Stamp in Time String
Format.
<scts> is returned when +CSMS <service> value is 1
and network supports.
The DCD signal shall be in ON state while data is entered. The
echoing of data is controlled by echo command E.