Telit Wireless Solutions ME310G1 - Page 491

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 491 of 1039 2021-09-23
Not Subject to NDA
<mode>
integer
0
enables/disables the #NITZ URC
Values:
0
:
disables the URC
1
:
enables the URC
Unsolicited field:
Name
Type
Description
<datetime>
string
string format depends on parameter <val>
12. "yy/MM/dd,hh:mm:ss" - ''basic' format, if
<val> is in (0..3)
13. "yy/MM/dd,hh:mm:ss±zz" - 'e xtended'
format, if <val> is in (4..7)
14. "yy/MM/dd,hh:mm:ss±zz,d" -
'e xtended' format with DST support, if <val>
is in (8..15)
For the meaning of the <datetime> subfields,
please check +CCLK and #CCLK commands
If the DST information is not sent by the network, then the
<datetime> parameter will have the format
"yy/MM/dd,hh:mm:ss±zz".
Date and time information can be sent by the network after GSM
registration or after PS attach.
AT#NITZ?
Read command reports whether
15. automatic date/time updating
16. Full Network Name applying
17. #NITZ URC (as well as its format)
are currently enabled or not in the format: