Telit Wireless Solutions ME310G1 - Page 569

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 569 of 1039 2021-09-23
Not Subject to NDA
The GPIO pin selected by the #FASTSHDN command must be used
for this purpose only. If you need to use the selected GPIO pin for
different activities, it must be free with the following command:
#FASTSHDN=0,<GPIO>
AT#FASTSHDN?
Read command reports the currently selected configuration in the format:
AT#FASTSHDN: <enable>,<GPIO>
AT#FASTSHDN=?
Test command returns the supported range of values for all the
parameters.
Enable fast shutdown on GPIO_05
AT#FASTSHDN=1,5
OK
AT#FASTSHDN?
#FASTSHDN: 1,5
OK
Force immediate fast shutdown
AT#FASTSHDN
OK