Telit Wireless Solutions ME310G1 - Page 577

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 577 of 1039 2021-09-23
Not Subject to NDA
<s>
integer
-
starting channel, see note section.
<e>
integer
-
ending channel, see note section.
Additional info:
2G Networks, for BCCH-Carrier
Network survey information text lines:
arfcn: <arfcn> bsic: <bsic> rxLev: <rxLev> ber: <ber> mcc: <mcc>
mnc: <mnc>
lac: <lac> cellId: <cellId> cellStatus: <cellStat> numArfcn:
<numArfcn> arfcn:
<CR><LF><CR><LF><CR><LF>
Name
Type
Default
Description
<arfcn>
integer
-
C0 carrier assigned radio
channel (BCCH - Broadcast
Control Channel)
<bsic>
integer
-
base station identification code;
if #CSURVF last setting is 0,
<bsic> is a decimal number, else
it is at the most a 2-digits octal
number
<rxLev>
integer
-
decimal number; it is the
reception level (in dBm)
<ber>
integer
-
always 0, dummy parameter
<mcc>
hex
-
hexadecimal 3-digits number; it
is the mobile country code
<mnc>
hex
-
hexadecimal 2-digits number; it
is the mobile network code
<lac>
integer
-
location area code; if #CSURVF
last setting is 0, <lac> is a
decimal number, else it is a 4-
digits hexadecimal number