Telit Wireless Solutions ME310G1 - Page 584

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 584 of 1039 2021-09-23
Not Subject to NDA
<e>
integer
-
ending channel, see #CSURV command.
Additional info:
2G Networks, for BCCH-Carrier
Network survey information text lines:
<arfcn>,<bsic>,<rxLev>,<ber>,<mcc>,<mnc>,<lac>,<cellId>,<cellStat>,<numArfc
n>
<CR><LF><CR><LF><CR><LF>
Name
Type
Default
Description
<arfcn>
integer
-
C0 carrier assigned radio channel (BCCH -
Broadcast Control Channel)
<bsic>
integer
-
base station identification code; if #CSURVF
last setting is 0, <bsic> is a decimal number,
else it is at the most a 2-digits octal number
<rxLev>
integer
-
decimal number; it is the reception level (in
dBm)
<ber>
integer
-
always 0, dummy parameter
<mcc>
hex
-
hexadecimal 3-digits number; it is the
mobile country code
<mnc>
hex
-
hexadecimal 2-digits number; it is the
mobile network code
<lac>
integer
-
location area code; if #CSURVF last setting
is 0, <lac> is a decimal number, else it is a 4-
digits hexadecimal number
<cellId>
integer
-
cell identifier; if #CSURVF last setting is 0,
<cellId> is a decimal number, else it is a 4-
digits hexadecimal number
<cellStat>
string
N/A
cell status
Values:
CELL_SUITABLE
:
C0 is a suitable cell