EasyManua.ls Logo

Telit Wireless Solutions ME310G1 - Page 592

Telit Wireless Solutions ME310G1
1039 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 592 of 1039 2021-09-23
Not Subject to NDA
2
:
enable jamming detection, and report its
condition with an URC, see Additional info
section
3
:
enable jamming detection, and report its
condition as <mode>=1 and <mode>=2
4
:
enable jamming detection, and report its
condition with an URC every 3 sec, see
<mode>=2
5
:
enable jamming detection, and report its
condition as <mode>=1 and <mode>=4
6
:
not used
<sat2G>
integer
60
is the starting absolute threshold of
RSSI 2G Network. After a frequency
scan in 2G bands, if the measured
power of a carrier is greater than
<sat2G> threshold, that carrier is
counted as possible jammed
carrier.
Value:
0÷63
:
threshold values
<unused>
integer
N/A
unused parameter
Value:
0
:
dummy value
<carrNum2G>
integer
100
is the minimum number of possible
jammed carriers to consider that
the module is under jamming
condition
Value:
0÷200
:
number of carriers

Table of Contents

Other manuals for Telit Wireless Solutions ME310G1

Related product manuals