Telit Wireless Solutions ME310G1 - Page 612

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 612 of 1039 2021-09-23
Not Subject to NDA
AT+CGAUTH?
Read command returns the PDP authentication parameters, excluding
<password>, for every defined PDP context, in the format:
+CGAUTH: <cid1>,< auth_type1 >,<username1><CR><LF>
...
+CGAUTH:<cid max >,<auth_type max >,<username max ><CR><LF>
AT+CGAUTH=?
Test command reports the supported range of values for parameters
<cid>, <auth_type> and the maximum lengths for parameters <username>
and <password>.