Telit Wireless Solutions ME310G1 - Page 617

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 617 of 1039 2021-09-23
Not Subject to NDA
Values:
0
:
both IP address, and subnet mask are
started explicitly, separated by a
space.
1
:
the printout format is applying
/(forward slash) subnet-prefix
Classless Inter-Domain Routing (CIDR)
notation.
<IPv6_LeadingZeros>
integer
0
selects whether leading
zeros are omitted or not.
Setting does not apply if
IPv6 address format
<IPv6_AddressFormat>=0.
Values:
0
:
leading zeros are omitted.
1
:
leading zeros are included.
<Pv6_CompressZeros>
integer
0
selects whether 1-n
instances of 16-bit- zero
values are replaced by only
"::". This applies only once.
Setting does not apply if
IPv6 address format
<IPv6_AddressFormat>=0.
Values:
0
:
no zero compression.
1
:
use zero compression.
AT+CGPIAF?
Read command returns the current parameter setting.