Telit Wireless Solutions ME310G1 - Page 622

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 622 of 1039 2021-09-23
Not Subject to NDA
<bfr>
integer
0
controls the effect on
buffered codes when <mode>
1 or 2 is entered.
Values:
0
:
TA buffer of unsolicited result codes defined within
this command is cleared when <mode> 1 or 2 is
entered.
1
:
TA buffer of unsolicited result codes defined within
this command is flushed to the TE when <mode> 1 or 2
is entered (OK response shall be given before flushing
the codes)
Unsolicited fields:
Name
Type
Description
<PDP_type>
string
Packet Data Protocol type, which specifies the
type of packet data protocol
<PDP_addr>
string
identifies the terminal in the address space
applicable to the PDP
<cid>
integer
PDP Context Identifier
AT+CGEREP?
Read command returns the current <mode> and <bfr> settings, in the
format:
+CGEREP: <mode>,<bfr>
AT+CGEREP=?
Test command reports the supported range of values for the +CGEREP
command parameters.