Telit Wireless Solutions ME310G1 - Page 628

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 628 of 1039 2021-09-23
Not Subject to NDA
<lac>, <ci>, <AcT>, and <rac> network information is reported by URC
only if <mode>=2 or 4, and the module is registered on some network
cell.
AT+CGREG?
Read command returns the current value of <mode>, the registration status
<stat>, and the network information (<lac>, <ci>, <AcT>, and <rac> ) according to
the used <mode> parameter value.
+CGREG: <mode>,<stat>[,<lac>,<ci>[,<AcT>,<rac>]]
<lac>, <ci>, <AcT>, and <rac> network information is reported only if <mode>=2
or 4 and the module is registered on some network cell.
AT+CGREG=?
Test command returns supported values for parameter <mode>.