Telit Wireless Solutions ME310G1 - Page 640

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 640 of 1039 2021-09-23
Not Subject to NDA
Value:
180÷3600
:
delay in seconds
<urcmode>
integer
0
URC presentation mode.
Values:
0
:
disables URC
1
:
enables URC, see Additional info section.
Additional info:
<urcmode>=1
enables the URC after an automatic activation/reactivation of the
local IP address obtained from the network. It has meaning only if
<retry>=/=0.
The format of the URC message is:
#SGACT: <ip_address>
Unsolicited field:
Name
Type
Description
<ip_address>
string
local IP address obtained from the network.
The URC presentation mode <urcmode> is related to the current
AT instance only. Last <urcmode> setting is saved for every
instance as extended profile parameter, thus it is possible to
restore it even if the multiplexer control channel is released and
set up, back and forth.
< retry > and <delay> setting are global parameters saved in NVM.
If the automatic activation is enabled on a context, then it is not
allowed to modify by the command #SCFG the association between
the context itself and the socket connection identifier; all the other