Telit Wireless Solutions ME310G1 - Page 651

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 651 of 1039 2021-09-23
Not Subject to NDA
if <srMode> = 2 (Data view):
SRING: <connId>,<recData>,<data>
if <srMode> = 3 (Data view with UDP datagram information):
SRING: <sourceIP>,<sourcePort>,<connId>,<recData>,<dataLeft>,<data>
Name
Type
Default
Description
<recData>
integer
-
amount of data received on the socket
connection number <connId>
<data>
mixed
-
data received displayed following
<recvDataMode> value
<sourceIP>
string
-
IP address of the source of data
<sourcePort>
string
-
IP port of the source of data
<dataLeft>
integer
-
number of bytes left in the UDP
datagram
Keepalive is available only on TCP connections.
For the behavior of #SL and #SLUDP in case of auto response mode or in
case of no auto response mode, see the description of the two commands.
AT#SCFGEXT?
Read command returns the current socket extended configuration parameters
values for all the six sockets, in the format:
#SCFGEXT: <connId
1
>,
<srMode>,<dataMode>,<keepalive>,<ListenAutoRsp>,0<CR><LF>
. . .
#SCFGEXT:<connId
conMax
>,<srMode>,<dataMode>,<keepalive>,
<ListenAutoRsp>,0<CR><LF>