Telit Wireless Solutions ME310G1 - Page 657

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 657 of 1039 2021-09-23
Not Subject to NDA
•
Set the new transmission timer behavior for <connId>=1 and
<connId>=2 sockets.
AT#SCFGEXT2=1,1
OK
AT#SCFGEXT2=2,1
OK
Check the current extended configuration of the six sockets
AT#SCFGEXT2?
#SCFGEXT2: 1,1,0,0,0,0
#SCFGEXT2: 2,1,0,0,0,0
#SCFGEXT2: 3,0,0,0,0,0
#SCFGEXT2: 4,0,0,0,0,0
#SCFGEXT2: 5,0,0,0,0,0
#SCFGEXT2: 6,0,0,0,0,0
OK
Check the current configuration of the six sockets
AT#SCFG?
#SCFG: 1,1,300,90,600,50
#SCFG: 2,1,300,90,600,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
Change the <txTo> data sending timeout of the <connId>=1 socket.
AT#SCFG=1,1,300,90,600,30
OK