Telit Wireless Solutions ME310G1 - Page 681

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 681 of 1039 2021-09-23
Not Subject to NDA
•
Starts listening on <LocPort> (previous setting of firewall through
#FRWL has to be done)
AT#SLUDP=1,1,<LocPort>
OK
SRING: 1 UDP data from a remote host available
AT#SA=1,1
OK
SRING: 1
AT#SI=1
#SI: 1,0,0,23,0 23 bytes to read
OK
AT#SRECV=1,23
#SRECV:1,23
message from first host
OK
AT#SS=1
#SS: 1,2,<LocIP>,<LocPort>,<RemIP1>,<RemPort1>
OK
AT#SSENDUDP=1,<RemIP1>,<RemPort1>
>response to first host
OK
SRING: 1 UDP data from a remote host available
AT#SI=1
#SI: 1,22,23,24,0 24 bytes to read
OK
AT#SRECV=1,24
#SRECV:1,24
message from second host
OK