Telit Wireless Solutions ME310G1 - Page 693

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 693 of 1039 2021-09-23
Not Subject to NDA
•
Get information about data traffic of all sockets.
AT#SI
#SI: 1,123,400,10,50
#SI: 2,0,100,0,0
#SI: 3,589,100,10,100
#SI: 4,0,0,0,0
#SI: 5,0,0,0,0
...
OK
•
Assume that sockets 1,2,3 are opened and having some data traffic.
To get traffic information only for the socket <connId>=1 enter the
following command:
AT#SI=1
#SI: 1,123,400,10,50
OK
Socket <connId>=1 has 123 bytes sent, 400 bytes received, 10 bytes
waiting to be read and 50 bytes waiting to be acknowledged from the
remote side.