Telit Wireless Solutions ME310G1 - Page 695

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 695 of 1039 2021-09-23
Not Subject to NDA
2
:
UDP socket
<direction>
integer
N/A
direction of the socket
Values:
0
:
None
1
:
Dialer
2
:
Listener
Issuing #ST command without <connId> socket identifier, it returns
information about type of all sockets. For each socket, the format of
the returned message is:
#ST: <connId
n
>,<type
n
>,<direction
n
><CR><LF>
AT#ST=?
Test command reports the range for parameter <connId>.