Telit Wireless Solutions ME310G1 - Page 712

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 712 of 1039 2021-09-23
Not Subject to NDA
32÷1460
:
Ping Echo Request length
<timeout>
integer
50
the timeout, in 100 ms units, waiting a
single Echo Reply
Value:
1÷600
:
timeout, in 100 ms units
<ttl>
integer
128
time to live
Value:
1÷255
:
time to live
<pdpId>
integer
-
specifies a PDP context definition. Use
the AT+CGDCONT=? test command to
get the range of the supported values.
Refer to additional info section for
default value.
Additional info:
<pdpId> default value.
The default value of this parameter depends on the software
customization as shown in the following table.
Software customization
<pdpId> default value
Verizon
3
All other
1
Unsolicited fields:
Name
Type
Description
<replyId>
integer
Echo Reply number
<IpAddress>
string
IP address of the remote host
<replyTime>
integer
time, in 100 ms units, required to receive the
response