Telit Wireless Solutions ME310G1 - Page 766

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 766 of 1039 2021-09-23
Not Subject to NDA
Value:
0
:
use this value
<cid>
integer
N/A
PDP context identifier. Refer to
additional info section for default
value.
Value:
1÷6
:
available value
Additional info:
<cid> default value.
The default value of this parameter depends on the software customization
as shown in the following table.
Software customization
<cid> default value
Verizon
3
All other
1
AT#SMTPCFG?
Returns the current settings in the format:
#SMTPCFG:<ssl_enabled>,<port>,<mode>,0,0,<cid><CR><LF>
AT#SMTPCFG=?
Returns the supported range of parameters <ssl_enabled>, <port>, <mode> in
the format:
#SMTPCFG:(list of supported<ssl_enabled>s),(list of supported <port>s), (list of
supported <mode>s), (0), (0), (0)