Telit Wireless Solutions ME310G1 - Page 787

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 787 of 1039 2021-09-23
Not Subject to NDA
<contentType>
string
"Content-Type" header line, as received
from the server (see RFC 2616)
<dataSize>
integer
byte amount of data received from the
server (if the server doesn't report the
"Content-Length:" header line, the
parameter value is 0)
The HTTP request header sent with #HTTPSND always contains
the "Connection: close" line, and it cannot be removed.
If there are no data from server or the server doesn't answer
within the time interval specified in <timeout> parameter of
#HTTPCFG command, then the URC #HTTPRING
<http_status_code> parameter will have value 0.
AT#HTTPSND=?
Test command returns the supported range of parameters <profId>,
<command> and <dataLen> and the maximum length of <resource>,
<postParam> and <extraHeaderLine> string parameters in the format:
# HTTPSND: (list of supported <profId>s),(list of supported <command>s),
<rLength>, (list of supported <dataLen>s),<pLength>,<mLength>
Additional info:
<...Length> parameters meaning:
Name
Type
Default
Description
<rLength>
integer
-
maximum length of parameter
<resource>
<pLength>
integer
-
maximum length of parameter
<postParam>
<mLength>
integer
-
maximum length of parameter
<extraHeaderLine>