Telit Wireless Solutions ME310G1 - Page 795

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 795 of 1039 2021-09-23
Not Subject to NDA
0
:
not available (secure socket has not yet been closed)
1
:
the remote TCP connection has been closed (RST, or
any fatal error in send/recv are all included within this
case)
2
:
socket inactivity timeout
3
:
network deactivation (PDP context deactivation from
network)
4
:
SSL "Close Notify Alert" message has been received
5
:
the remote TCP connection has been closed (FIN) after
all data have been retrieved from socket
6
:
closure due to any other SSL alert different from the
previous ones
Unsolicited fields:
Name
Type
Description
<recData>
integer
number of bytes available to be read from the TLS/SSL
record that is currently being processed (obviously:
already decoded from TLS/SSL record) plus the number of
bytes available to be read in the TCP/IP stack.
<dataLen>
integer
length of the current chunk of data in bytes
<data>
hex
received data in ASCII format
If secure socket is not enabled using #SSLEN only test requests can be
made.
This version of command reordered the parameters of the command, so
this is not interchangeable with previous version
AT#SSLCFG?