Telit Wireless Solutions ME310G1 - Page 804

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 804 of 1039 2021-09-23
Not Subject to NDA
If secure socket has not been enabled through #SSLEN command, only
test command can be used
If socket is connected an error code is reported
Only "rsa_sign" certificates are supported by the Telit Module in client
authentication.
CA certificate stored in NVM
CA certificates stored in NVM are shared among all secure sockets
<SSId>s
AT#SSLSECCA?
Read command reports what security data are stored for each <CertId>. The
returned message has the following format:
#SSLSECCA: <CertId>,0,<CACertIsSet>,0,,0
#SSLSECCA: <CertId>,0,<CACertIsSet>,0,,0
<CAcertIsSet> is 1 if related data are stored into NVM, 0 otherwise.
Additional info:
This Additional info section describes the parameters, if not described in
the previous sections, returned by the AT#SSLSECDATA? read command
Name
Type
Default
Description
<CAcertIsSet>
integer
0
identifies the CA certificate presence
in the NVM
Values:
0
:
not present