Telit Wireless Solutions ME310G1 - Page 880

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 880 of 1039 2021-09-23
Not Subject to NDA
AT#M2MREAD=?
Test command returns OK result code.
AT#M2MREAD="/xxfolder/config/config.txt"
<<< here receive the prompt; then the file is displayed, immediately after
the prompt
OK
AT#M2MCHDIR="/xxfolder"
OK
AT#M2MREAD=config/config.txt
<<< here receive the prompt; then the file is displayed, immediately after the
prompt
OK