ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 882 of 1039 2021-09-23
print whole file content at once or one
<maxByte> and exit
print one < maxByte > and wait for <CR> char to
continue
<maxByte>=0 and <chunkPrint>=1 combination is not allowed.
Maximum full path length is 128 chars, maximum folder or file
name is 64 chars. Overall max full file path is 128 + 64 = 192 chars.
If the file <file_name> or its path is not present in the file system,
an error code is reported.
<file_name> and its path are case sensitive.
<file_name> can be equivalently enclosed on quote or not.
When printing the file content in <maxByte> chunks, omit the
<file_name> on all subsequent AT command executions. Check
code examples for further details.
AT#M2MREADEXT=?
Test command returns OK result code.
To Next Page
Loading...
