Telit Wireless Solutions ME310G1 - Page 92

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 92 of 1039 2021-09-23
Not Subject to NDA
2
:
Line 2 (CPHS context only)
3
:
Fax
4
:
E-mail
5
:
Other
<count>
integer
network information reporting the number of
pending messages related to the message waiting
indicator <indicator>.
<count>
integer
number of pending messages related to the
message waiting indicator <indicator> as it is
stored on SIM
Entering AT#MWI= returns OK but has no effect.
AT#MWI?
Read command reports whether the presentation of the message waiting
indicator URC is currently enabled or not, and the status of the message
waiting indicators as they are currently stored on SIM. The format is:
#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>
#MWI: <enable>,<status>,<indicator>[,<count>][...]]]
AT#MWI=?
Test command returns the range of available values for parameter
<enable>.