Telit Wireless Solutions ME310G1 - Page 999

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 999 of 1039 2021-09-23
Not Subject to NDA
Below the meanings of <active> and <requested> parameters.
Name
Type
Default
Description
<active>
integer
-
value showing the active status
currently used by the system.
<requested>
integer
-
value showing the requested
status that will be activated on
the next power ON.
AT$AGNSSCFG=?
Test command returns the supported value range for
<provider>,<parameter>,<value>.