Textron JACOBSEN Eclipse 2 - Traction Drive Drum and Bearing Housing Assembly

5-10 4262930-Rev A
POWER TRAIN
5
Traction Drive Drum and Bearing
Housing Assembly
Removal and Installation
See Figures 5-16 through 5-19.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-5.)
2. Remove traction drive belts. (See “Traction Drive
Belts” on page 5-7.)
3. Remove right-side brake band. (See “Park Brake
Band” on page 7-8.)
Figure 5-16
4. Remove screw (6), lock washer (7), spacer (5), and
nut (8) from the brake bracket (1).
5. Remove screw (2), lock washer (3), and spacer (4),
and remove brake bracket (1).
Figure 5-17
6. Support the traction drive drum (13).
7. Remove key (9) from traction drum shaft (14).
8. Remove two screws (11) and lock washers (12) from
bearing housing (10).
Figure 5-18
9. Remove nut (15) and pulley (16).
1
TN0665
32
4
5
876
9
TN0823
10
13
14
1211
15
TN0821
16